MSI MS-6380 - Manual (Page 46)

Chapter 3
3-2
Power on the computer and the system will start POST (Power On
Self Test) process. When the message below appears on the screen, press
key to enter Setup.
Hit DEL if you want to run SETUP
If the message disappears before you respond and you still wish to
enter Setup, restart the system by turning it OFF and On or pressing the
RESET button. You may also restart the system by simultaneously pressing
, , and keys.
<
↑
> Move to the previous item
<
↓
> Move to the next item
<
←
> Move to the item in the left hand
<
→
> Move to the item in the right hand
Select the item
Jumps to the Exit menu or returns to the main menu from a submenu
<+/PU> Increase the numeric value or make changes
<-/PD> Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page
Setup Menu
Restore the previous CMOS value from CMOS, only for Option Page
Setup Menu
Load the default CMOS value from Fail-Safe default table, only for
Option Page Setup Menu
Load Optimized defaults
Save all the CMOS changes and exit
Entering Setup
Control Keys