Multi-Tech Systems MT5634ZPX-PCI-U/NV - Manual (Page 9)

MultiModemZPX Quick Start Guide
9
Step 4: Configure the Modem for Your Country
Different countries have different requirements for how modems must
function. Therefore, before you use your modem, you must configure it
to match the defaults of the country in which you are using it. You can
use one of two configuration methods:
• Using the Global Wizard to Configure Your Modem
• Using AT Commands to Configure Your Modem
Using the Global Wizard to Configure Your Modem
The Global Wizard configuration utility is recommended for computers
running Windows 98/Me/2000/XP/NT 4.0.
1. Insert the MultiModemZPX system CD into the CD-ROM drive. The
Autorun dialog box appears.
2. Click Initial Setup and Country Selection.
3. Choose either:
• Run Global Wizard from CD. This will not load the wizard onto
your hard drive, or
• Install Global Wizard on the HD. This will install the wizard onto
your hard drive for future use.
4. The Global Wizard dialog box appears. Click Next.
5. The Wizard searches for your modem and identifies it. Click Next.
6. Select the country in which the modem will be used. Click Next.
7. Review your choice of country. If it is correct, click Next to configure
the modem.
8. When Global Wizard announces that the parameters have been
set, click Finish to exit.