Conferencing calls, Holding calls, Conference —e – Motorola 9601 User Manual

Page 30: Hold —en

Operating the 9601 Pocket Phone

Issue 3 October 1997

3-9

4. Dial the transfer number.

5. Press

to display the Trans soft key.

6. Press the Trans soft key to complete the transfer process.

NOTE:

When both Call Appearance indicators are in use, you cannot
transfer additional parties or receive and make other calls.

Conferencing Calls

The Conference Call feature enables you to conference up to six parties.

To activate a conference call:

1. Inform the active party that he/she will be placed on hold in order to call the

third party.

2. Press

to display the Conf soft key.

3. Press the Conf soft key.

NOTE:

The active call is placed on hold and the second Call Appearance
indicator is activated.

4. Dial the telephone number of the next party.

5. When the party answers the call, press

to display the Conf soft key.

6. Press the Conf soft key to conference the two calls together on one call

appearance.

NOTE:

When both Call Appearance indicators are in use, you cannot
conference additional parties or receive and make other calls.

Holding Calls

To place a call on hold:

1. Press

NOTE:

The call is placed on hold and the Call Appearance indicator will
flash.

2. Press the soft key below the flashing indicator to return to the call.

Hold