Motorola 9601 - Manual (Page 19)

Using the 9601 Pocket Phone Battery Charger
Issue 3 October 1997 2-5
Inserting a Spare Battery Pack into the Charger
1. Place the spare battery pack into the Spare Battery Pack cradle.
NOTE:
The battery pack must be placed behind the lip of the cradle.
2. Ensure that the Battery indicator is yellow.
NOTE:
When the Battery indicator changes from yellow to steady green, the
spare battery pack is fully charged. It can remain in the charger until
needed.
Removing a Spare Battery Pack from the Charger
1. Ensure the Battery indicator is steady green.
NOTE:
The spare battery can be removed from the Spare Battery Pack
cradle if the light is yellow, but the battery will not be fully charged.
2. Remove the spare battery pack from the Spare Battery Pack cradle.
Inserting the 9601 Pocket Phone into the Charger
1. Slide the pocket phone into the pocket phone cradle.
2. Ensure that the Phone indicator is yellow.
NOTE:
When the Phone indicator changes from yellow to steady green, the
pocket phone is fully charged. It can remain in the charger until
needed.
Removing the 9601 Pocket Phone from the
Charger
1. Ensure the Phone indicator is steady green.
NOTE:
When the phone is placed in the charger, it is initially yellow for a few
seconds. You can answer a phone call during this time if the battery is
not fully drained.
2. Remove the pocket phone from the cradle.