Maxon Telecom MM-5100 User Manual

Page 18

Text mode
Original mode

MM-5100 Windows Setup Manual 090803 NZ

Page 18 of 44

4/09/2003

HyperTerminal communicates with the modem at 115200bps.
Type “AT” inside the HyperTerminal window then the Enter/CR key.
The Modem responds to AT command by sending an “OK” back.
This proves that the modem is correctly connected with PC through serial port and is
communicating at 115200bps.

Type “at+ipr?” and then Enter to confirm the Modems communication speed.
Modem responds to the above command with the set IPR value. This should be 115200.