Philips Magnavox MDV540VR/17 - Manual (Page 18)

18 Video Cassette Playback
• Other tape playback features are
on pages 40-47.
• If AUTO REPEAT is ON, playback will
begin when you insert a tape, even
when the record tab is intact. Details
are on page 40.
• You must connect the DVD/VCR to
a TV using the RF coaxial cable or
the audio/video cables in order to
use the VCR features.These hookups
are explained on pages eight and
11.
Helpful Hints
Read and follow the steps below to play a tape.
1 Turn on the TV. Set it to channel 3 or 4 or its
AUDIO/VIDEO IN channel. This depends on how you
connected the DVD/VCR to a TV.
Details are on pages 7-
15.
2 With the DVD/VCR power off, insert a tape in the
cassette compartment of the DVD/VCR. The VCR
light will appear on the front of the DVD/VCR. If the tape’s
record tab has been removed, play will start automatically.
If the DVD/VCR power is already on, press VCR to put the
DVD/VCR in VCR mode if necessary.The VCR light will
appear on the front of the DVD/VCR.
3 If playback does not start automatically, press VCR,
then press PLAY B.
4 Press STOP C to stop playback.
5 Press SEARCH/REWh to rewind the tape.
6 After the tape stops, press STOP/EJECT C A on the
front of the DVD/VCR to remove the tape.
1
2
6 Press STOP/EJECT C A on
the DVD/VCR.
Turn on the TV.
Insert a tape in the
DVD/VCR.
3
TIMER SET
SETUP SUBTITLE AUDIO
MODE
DISPLAY
TITLE
PREV/
CH
NEXT/
CH
RETURN
A-B
DVD
PLAY STOP
SEARCH
FF
PAUSE
SPEED NA508
SEARCH
REW
VCR
DISC
REPEAT
C-RESET
CLEAR
REC REPEAT
ANGLE
STANDBY-ON
2 3 1
SLOW
5 6 4
8 9 7
SEARCH MODE ZOOM
0 +10
MENU OK
4
5
H9660UD_1.qx4 04.4.14 4:47 PM Page 18