Al ar m s, Al arm s – Motorola T340 User Manual
Page 6
19
From the Standby screen, press and release
*
until
ALARMS?
displays. Press
+
to enter the ALARMS menu. Press
**+
to enter EVENT alarm mode.
• Press
*
to choose EVENT alarm 01, 02 or 03.
• Press
+
,
then press
*
until
. ,
(the enable
alarm icon) displays. Press
+
to move to the
next field.
• Press
*
until
J
(the enable alert icon) displays
and press
+
to move to the Message field.
• Press
*
to scroll through the characters
available, then press
+
to move to the next.
Note:
You can enter up to 14 characters
(letters, numbers or spaces). If the message
is less than 14 characters long, advance to
the rubout character (
®
) and press
+
to fill
the remaining character fields with blanks.
• At the last character field, press
+
to move to
the alarm Time-Date screen.
01//
H I
AAAAAAAAAAAAAA
03 . ,
H I
AAAAAAAAAAAAAA
03 . ,
H J
AAAAAAAAAAAAAA
03 . ,
H J
P I C K U P W E N D Y
AL
AR
M
S
20
• Press
*
to set the hour to the desired value.
• Move to the Minute, AM/PM, Day and Month
fields by pressing
+
, then press
*
to set the
value for each field.
• Press
)
in any field to set and exit.
Note:
You can only set one EVENT alarm at
a time. You must press
)
to save each
event alarm prior to setting the next alarm.
Note:
To alert on a daily basis set the Day
and Month to --/--.
• The Standby screen displays with
J
(the enable
alert icon).
• When an EVENT alarm expires, the message
displays and the pager alerts. Press any button
once to stop the alarm, and again to clear the
message.
03 . ,
H J
9:00
A
9/29
H J
9:05
P
9/28
H J
P I C K U P W E N D Y
AL
ARM
S
21
Note:
You can temporarily turn off a daily alert (for example, on a weekend).
To turn off the alert, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays. Press
+
to enter the ALARMS menu. Press
**+
to enter EVENT alarms
mode.
2. Press
*
until the EVENT alert you want to turn off displays. Press
+ +
to
move to the alert enable/disable field.
3. Press
*
until
I
(the disable alert icon) displays.
4. Press
)
to set and exit. The
alarm
remains set and turned on, but the
alert
won’t occur until it is turned on again.
• If the EVENT alarm is not stopped during
activation, the ALARM icon flashes.
• Press any button once to read the message,
and press again to clear.
H J
9:00
A
9/29
AL
AR
M
S
22
To turn the alert on again, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays. Press
+
to enter the ALARMS menu. Press
**+
to enter EVENT alarms
mode.
2. Press
*
until the EVENT alert you want to turn on displays.
3. Press
+ +
to move to the alert enable/disable field.
4. Press
*
until
J
(the enable alert icon) displays.
5. Press
)
to set and exit.
To turn off (erase) the alarm settings, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays. Press
+
to enter the ALARMS menu. Press
**+
to enter EVENT alarms
mode.
2. Press
*
until the EVENT alarm you want to turn off displays. Press
+
,
then
press
*
until -- (the disable alarm icon) displays.
3. Press
)
to set and exit.
AL
ARM
S