Functional description – Makita 6176D User Manual
Page 7
7
FUNCTIONAL
DESCRIPTION
CAUTION:
•
Always be sure that the tool is switched off before
adjusting or checking function on the tool.
Charging
Connect the charging plug to the charging connector, then
plug in the charger to the power receptacle. Charging takes 3
hours.
CAUTION:
•
The battery in your new tool is not fully charged. You will
need to charge it before use.
•
Do not operate the tool during charging.
•
Overcharging more than 2 days considerably shortens
the battery service life.
Always unplug the charger after completing the charge.
Switch action
For 6041D and 6076D
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
For 6176D
To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
1. Charging plug
1
002059
1. Switch trigger
1
002268
- BFL402R (2 pages)
- GA7001L (20 pages)
- GB Cordless Drill DF030D (48 pages)
- 190 (3 pages)
- 8280D (28 pages)
- BTD142 (28 pages)
- BHP441 (32 pages)
- HR2811FT (2 pages)
- 6801DB (4 pages)
- KP312 (16 pages)
- 6237D (20 pages)
- 6922N (4 pages)
- 6833 (16 pages)
- HP2041 (2 pages)
- 6337D (48 pages)
- 6917FD (16 pages)
- JR140DWA (5 pages)
- AG125 (20 pages)
- 6260DWPLE (2 pages)
- Sander (20 pages)
- 6407 (12 pages)
- 6337DWDLE (2 pages)
- BHR240 (32 pages)
- BCM2600 (44 pages)
- 6904VH (16 pages)
- 6904VH (20 pages)
- 6980FDWDE (2 pages)
- Angle Grinder (16 pages)
- 6261D (24 pages)
- BDA350 (24 pages)
- HP2031 (4 pages)
- N9501B (16 pages)
- 2012NB (20 pages)
- HP2051F (9 pages)
- 6980FDWA (2 pages)
- HP2050 (48 pages)
- BFS450 (3 pages)
- HR2022 (52 pages)
- HM1500B (16 pages)
- BHP454Z (2 pages)
- GA7020 (3 pages)
- UB1101 (1 page)
- 6953 (16 pages)
- 9500DW (2 pages)
- BDF450 (2 pages)