Additional safety rules for charger & tool, Save these instructions – Makita 6176D User Manual
Page 6
6
ADDITIONAL SAFETY RULES FOR CHARGER &
TOOL
1. The charger and the tool are specifically
designed to work together. Do not attempt
to charge any other cordless tool with this
charger. Do not attempt to charge the tool
with any other charger.
2. Do not charge the tool when temperature
is BELOW 10°C (50°F) or ABOVE 40°C
(104°F).
3. Do not attempt to use a step-up trans-
former, an engine generator or DC power
receptacle.
4. Do not store the tool in locations where
the temperature may reach or exceed 50°C
(122°F).
5. Do not incinerate the tool even if it is
severely damaged or is completely worn
out. The tool can explode in a fire.
6. Do not charge inside a box or container of
any kind. The tool must be placed in a well
ventilated area during charging.
SAVE THESE INSTRUCTIONS
- BFL402R (2 pages)
- GA7001L (20 pages)
- GB Cordless Drill DF030D (48 pages)
- 190 (3 pages)
- 8280D (28 pages)
- BTD142 (28 pages)
- BHP441 (32 pages)
- HR2811FT (2 pages)
- 6801DB (4 pages)
- KP312 (16 pages)
- 6237D (20 pages)
- 6922N (4 pages)
- 6833 (16 pages)
- HP2041 (2 pages)
- 6337D (48 pages)
- 6917FD (16 pages)
- JR140DWA (5 pages)
- AG125 (20 pages)
- 6260DWPLE (2 pages)
- Sander (20 pages)
- 6407 (12 pages)
- 6337DWDLE (2 pages)
- BHR240 (32 pages)
- BCM2600 (44 pages)
- 6904VH (16 pages)
- 6904VH (20 pages)
- 6980FDWDE (2 pages)
- Angle Grinder (16 pages)
- 6261D (24 pages)
- BDA350 (24 pages)
- HP2031 (4 pages)
- N9501B (16 pages)
- 2012NB (20 pages)
- HP2051F (9 pages)
- 6980FDWA (2 pages)
- HP2050 (48 pages)
- BFS450 (3 pages)
- HR2022 (52 pages)
- HM1500B (16 pages)
- BHP454Z (2 pages)
- GA7020 (3 pages)
- UB1101 (1 page)
- 6953 (16 pages)
- 9500DW (2 pages)
- BDF450 (2 pages)