beautypg.com

Makita DPC 6400 User Manual

Page 24

background image

24

15

16

13

14

Put the guard plate (13) on.

Screw on nuts (14) and tighten by hand.

To tighten the V-belt see ”Tightening the V-belt / Checking
V-belt tension”.

Tighten the nuts (14) firmly with the combination wrench.

IMPORTANT:

When you reposition the cutting attachment, the direction
of rotation of the cutting wheel changes.

Diamond cutting wheels must be installed in the proper
direction of rotation!

A

Replacing/cleaning the spark arrester screen

The spark arrester screen should be checked and cleaned
regularly.

Loosen the 2 screws (15) and remove the spark arrester
screen (16).

Reassembly the spark arrester screen and tighten the screws.

CAUTION:

Do not use sharp or pointed objects for screen cleaning.
Damaged or misformed screen wires may result.

B

This manual is related to the following products: