Motorola HT820 - Manual (Page 5)

MAKE CALLS
Note: Your HT820 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Function Action
Make a voice dial call Short press left
m
button & speak the
name after the tone
End a call Short press left
m
button
Receive a call Short press left
m
button
Reject a call Long press left
m
button until ringing
stops. Call ignored.
Redial last call Long press left
m
button
Answer a second Press and hold the
incoming call Call button (places
first call on hold)
MAKE CALLS
CONTINUED
Function Action
Use Call Waiting Long press left
m
button, 1st call put
on hold. 2nd call
becomes active.
Join a 3-way call Press both volume
(Note: Feature is phone/ buttons
+ -
network dependent.) for approx. 2
seconds at the
same time. Both
calls become active.
Put an active call on Long press left
m
hold or resume a call button
on hold
Mute a call Press the volume
buttons
+ -
at the same time.
Unmute a call Press the volume
buttons
+ -
at the same time.
INDICATOR LIGHTS
The indicator light provides information about
your headphone status.
With the Charger Plugged In
Headphone Indicator Status
On (steady) Charging
Off Charging complete
With No Charger Plugged In
Headphone Indicator Status
Off Power off
On (steady) Pairing mode
10 rapid flashes Pairing successful
Slow pulse Connected
To turn off the indicator lights, press both
<
and
> at the same time. To turn the
indicator lights back on, press both
> at the same time.
AUDIO TONES
The audio tones provide information about your
headphone status.
Audio Tone Headphone Status
Single high tone when Volume at minimum
pressing volume button or maximum
Five rapid high tones Low battery
repeated every 60 sec.
No audio indications; Out of range
deteriorating quality
Ring tone Incoming call
Single high tone Pairing confirmation
Single low tone Voice activation
Dual high/low tone Voice tag not
recognized
Single high tone End call
Low to high tone Phone network
not available
Two tones Mute on / off
Single tone Power on / off