Morphy Richards Ecovac 70096 Rev 2 (Page 1) - Manual (Page 5)

Switching on
Pull out the supply cable to its maximum
length and plug the appliance into the mains
supply. Push the on/off foot switch to start
the motor.
Controlling suction power
The suction power can be varied to suit
the surface being cleaned, by using the
electronic suction power regulator. See table
for guideline settings.
The suction power can also be controlled
on the hose handle.
Closed: full suction
Open:
low suction
Overheating protection
In the event of a motor overload, your
vacuum cleaner will switch off automatically.
Press the on/off switch and let the motor
cool down.
The vacuum cleaner cuts out
automatically when:
• The floor nozzle or tubes become
blocked
• Using the vacuum cleaner with a full air
box.
• The airbox filter is very dirty
• The motor protection filter is very dirty
• The exhaust filter is very dirty
Rectify the cause of the cut out and do
not use for 15 minutes to allow the motor to
cool.
MIN
MAX
Power setting Application
Curtains
and delicate
fabrics
Textiles and
upholstery
Floor
coverings
such as rugs
or economy
setting
for carpets
Carpets or
hard floor
coverings
MIN MAX
MIN MAX
MIN MAX
MIN MAX
5
Open Closed