Mio Recumbent Bike SportsArt C520R - Manual (Page 12)

Assembly Seat Pedal Proximity (Continued)
Connection Point Adjustment (Continued)
Then, move the shock to the front hole and secure it. Please refer to the instructions
and diagrams below.
a. Remove the screw and washer.
b. Tap out the bushing.
c. Move the end of the gas spring to the
front hole.
d. Put the bushing through the hole in the
frame and past the hole in the gas spring.
Secure the washer and screw.
Use the same process to adjust the connection point again, if desired.
10