Marantz SC-7S1 - Manual (Page 19)

16
7. How to operate function and how to set up
■ Attenuate function
With one touch, the volume can be decreased, instantly. The
ATT button on the SC-7S1 or the Remote Control, is used for
this function.
The volume will be indicated in the display window & the indica-
tor above the ATT button will be illuminated.
Factory setting is -20dB. But this can be changed to -40dB, or
-60dB.
■ How to set up the attenuation level
ቢ Press ATT button for more than 2 seconds.
ባ The Indicator above the ATT button will begin to flash, the
volume indication will be changed to the attenuation level
setting.
B TRIM
ATT EXIT E
ቤ Press the ATT button, the attenuation level will be changed
with every press.
ብ Unless the button is pressed within 2 seconds, the attenu-
ation level will be fixed. Once the level is fixed, the display
will turn back to the volume indication.
The setting will be memorized.
Press ATT button
Attenuate function level Setting
Unit
or
Remote Controller
Light
Flash