Moxa Technologies CP-118EL - Manual (Page 49)

PCI Express Board User’s Manual Serial Programming Tools
3-37
SCO
MOXA provides drivers that allow you to use the following serial board products under SCO
Unix.
y PCI Express Boards: CP-118EL,CP-168EL, CP-104EL.
y Universal PCI Boards: CP-118U, CP-168U, CP-104UL, CP-104JU, CP-102U, CP-102UL
y PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI
y ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS
Follow the steps given in this section to install the SCO driver. Note that the SCO driver provided
by MOXA only supports RS-232. Consequently, the SCO driver will only work with CP-118U
ports that are configured for RS-232. MOXA provides drivers for the following versions of SCO:
y SCO OpenServer
y SCO UnixWare 7
y SCO UnixWare 2.1
The following steps are for installing the driver under SCO OpenServer. The installation
procedures for SCO UnixWare 7 and SCO UnixWare 2.1 are similar.
1. Copy the driver file .tar to your host.
2. #tar xvf
/tmp/moxa/mxintall
/tmp/moxa/sco.tar
3. # cd/tmp/mxinstall
# ./mxinstall
4. The window shown below will open next. Press any key to continue.
Copyright© 2006 MOXA Technologies Co., Ltd.
All Rights Reserved.
MOXA Smartio Family Device Driver Installation (Ver. 1.8)
For SCO UNIX System V/386 Release 3.2
Tar files, please wait…..O.K.
Press any key to continue