Moxa Technologies CP-118EL User Manual
Page 48
PCI Express Board User’s Manual
Serial Programming Tools
3-36
NOTE
The following procedure shows how to install the CP-118EL driver under Linux.
Execute the following commands from the Linux prompt:
1.
#mount /dev/cdrom /mnt/cdrom
#cd /
#mkdir moxa
2.
#cd moxa
#cp /mnt/cdrom/
.
3.
#tar xvfz mxser.tgz
4.
#cd mxser
#make clean; make install
5.
#cd /moxa/mxser/driver
#./msmkod
6.
#modprobe mxser
(If you install ISA Boards, use the command # insmod mxser ioaddr=0x???, 0x???, 0x???,
0x???
<- 1st ISA, 2nd ISA, 3rd ISA, 4th ISA)
Using /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o
Warning: loading /lib/modules/2.4.20-8/kernel/drivers/char/mxser.o will taint the kernel: no
license
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
MOXA Smartio/Industio family driver version 1.9
Tty devices major number = 30, callout devices major number = 35
Found MOXA CP-118EL series board (BusNo=2,DevNo=13)
Module mxser loaded, with warnings
7.
Use the MOXA diagnostics utility to verify the driver status:
#cd /moxa/mxser/utility/diag
#./msdiag
= MOXA Smartio/Industio Family Multiport Board Status Utility(1.1)=
Tty Device Major Number= 30.
Callout device Major Number= 35.
Board 1 : CP-118EL series (BusNo=2, DevNo=13)
Port 1: 0xac00, max. baudrate = 921600 bps.
Port 2: 0xac08, max. baudrate = 921600 bps.
Port 3: 0xac10, max. baudrate = 921600 bps.
Port 4: 0xac18, max. baudrate = 921600 bps.
Port 5: 0xac20, max. baudrate = 921600 bps.
Port 6: 0xac28, max. baudrate = 921600 bps.
Port 7: 0xac30, max. baudrate = 921600 bps.
Port 8: 0xac38, max. baudrate = 921600 bps.
8.
Use the MOXA terminal utility to test the tty ports:
#cd /moxa/mxser/utility/term
#./msterm