Minuteman UPS MCP 1000i - Manual (Page 19)

IF THE UPS REQUIRES SERVICE
1. Use the TROUBLESHOOTING chart section 5 to eliminate obvious causes.
2. Verify that no circuit breakers are tripped. A tripped circuit breaker is the most
common problem.
3. Call your dealer for assistance. If you cannot reach your dealer or if he cannot
resolve the problem, call or fax Minuteman Technical Support at the following
numbers: Voice phone (972) 446-7363, FAX line (972) 446-9011, e-mail:
[email protected]. Please have the following information available
BEFORE calling technical support:
A. Your Name and address.
B. Where and when the unit was purchased.
C. All of the model information on the rear of your MCP Series UPS.
D. Any information on the failure, including LEDs that may be illuminated.
E. A description of the protected equipment, including model numbers if
possible.
4. A technician will ask you for the above information and, if possible, help solve your
problem over the phone. In the event that the unit requires factory service, the
technician will issue you a Return Material Authorization Number (RMA #). If the UPS
is under warranty, the repairs will be done at no charge. If not, there will be a
charge for repair.
5. Pack the UPS in its original packaging. If the original packaging is no longer available,
ask the technical support technician about obtaining a new set. It is important to
pack the UPS properly in order to avoid damage in transit. Never use Styrofoam
beads for a packing material. Include a letter with your name, address, daytime
phone number, RMA number, a copy of your original sales receipt, and a brief
description of the trouble.
6. Mark the RMA# on the outside of all packages. The factory cannot accept any
package without the RMA# marked on the outside.
7. Return the UPS by insured, prepaid carrier to:
Minuteman, Para Systems, Inc.
1455 LeMay Drive
Carrollton, TX 75007
17