Memorex MPH7895 - Manual (Page 11)

16. MEMO LED Indicator: Lights up to indicate the presence of Memo message and
blinks if there are new Memo message(s).
17. MSG LED Indicator: Lights up to indicate the presence of Incoming Message (ICM)
and Two-Way Recordings. Blinks if there are new Incoming Message(s) (ICM) or Two-
Way Recording(s).
18. CHG (Charge) / IN USE LED Indicator: Lights up steadily when the phone is being
used and when the handset is being charged on the base .
19. Digital LED Display: A two-digit LED display to indicate the number of Incoming
Message(s) and Two-Way Recording(s). Also displays the system status and the cur-
rent channel number while in TALK mode.
20. Retainer Tab: Allows the handset to hang on the base unit at wall mount position.
MOUNTING POSITION
DESKTOP USE:
Connect the telephone line cord to the TEL LINE jack on
the rear of the base unit and connect the opposite end to
the telephone modular jack.
WALL USE:
A. WITH A STANDARD MODULAR WALL JACK
1.
Install the wall mount bracket at the position as shown in Figure 5.
(Figure 5)
2. Connect the short telephone line cord to the TEL Line jack on rear of the base.
3. Connect the opposite end of the telephone line cord to the modular wall jack.
4. Align the wall mounting slots with the studs located on the modular wall plate and slide
the base down to lock in place.
NOTE: If you do not have a standard modular wall jack, find a qualified technician to mount
one on the wall.
10
(Figure 4)
Telephone Modular
Wall Jack
Studs
Base Unit
(Side View)
Wall Mounting
Slots
Wall Mount
Bracket
Code Function
00-59 Message / Timer count / Channel No.
-- Answering OFF
Ir Memo Recording
2r Two-Way Recording
An Answering Mode
Rc Remote Control
FU Memory Full
ER Erasing Message
OP OGM Playback
Or OGM Recording
MPH7895/04281A(English).put 7/5/01, 4:07 PM Page 11 Adobe PageMaker 6.5C/PPC