Memorex MPH7895 - Manual (Page 22)

# Set Answer Mode to OFF
During playback, you can press the following keys:
7 Playback Previous Message
8 Repeat a Message
9 Skip Forward to the Next Message
0 Erase a Message
* Stop Function
B. STOP FUNCTION
Press *
* * * * to abort the current function.
C. CHANGING THE PASSWORD
1.
Press the 1 key. The unit will prompt "(current code). Enter new password."
2. After a long beep, enter your new 2-digits password, and the unit will announce "(new
code). "
D. SETTING THE DAY AND TIME
1.
Press the 2 key. The unit will announce the current day and time. The unit will prompt
"Enter new day."
2. After a long beep, enter the new day (Sunday = 1, Monday = 2, Tuesday = 3, etc.). The
unit will then prompt "Enter new time."
3. After hearing a long beep, enter the new hour(01-12).
4. After two beeps, enter the new minute (00-59).
5. After two beeps, press 1 for AM, or press 2 for PM. The unit will announce the new day
and time, followed by a beep. The unit will prompt, "Please enter next command."
E. SETTING ANSWER MODE TO ON
1.
Press the 6 key.
2. The unit will announce, "Answering machine is ON."
F. SETTING ANSWER MODE TO OFF
1.
Press the # key.
2. The unit will announce "Answering machine is OFF."
G. OGM RECORDING
1.
Press the 5 key. The unit will prompt "Please record your announcement after the
beep. To stop, press star (*)."
2. After hearing a long beep, begin your announcement. The maximum recording time is
30 seconds.
3. Press star (*) to stop recording and the unit will automatically playback once for your
review.
H. OGM PLAYBACK
1.
Press the 8 key and the unit will playback the OGM recorded. If there is no OGM, the
unit will announce "Please enter next command".
I. RECORDING A MEMO
1.
Press the 4 key and the unit will prompt, "Please record your message after the beep.
To stop press star (*)."
2. After hearing a long beep, begin your recording. The maximum recording time is
2 minutes.
3. Press star (*) to stop recording.
J. PLAYBACK MESSAGES / MEMOS
1.
Press the 7 key for Incoming Message (ICM) / Two-Way Recording playback or press
3 key for Memo message playback. The unit will announce "You have (number) (new)
(Memo) message."
K. PLAYBACK OPTIONS
Review Previous Message: Press 7, to go to the previous message.
Repeat Messages: Press 8, to restart the same message from the beginning.
Skip Message: Press 9, to skip forward to the next message .
Erase a Message: Press 0, to erase a particular message.
Stop Message Playback: Press *
* * * * , to terminate message playback.
21
MPH7895/04281A(English).put 7/5/01, 4:08 PM Page 22 Adobe PageMaker 6.5C/PPC