Memorex MX4137 - Manual (Page 11)

10
OPERATING INSTRUCTIONS (CONTINUED)
Press the POWER button to turn
the unit on.
2
1
MANUAL TUNING: Repeatedly
press the Tune/Skip/Search o 1
or n 2 button to manually
advance the frequency in the
display up or down until the
desired frequency appears.
2
1
4
Press the STOP/BAND (■) button
to select AM or FM.
2
3
Press the TUNER Function button
to select the radio.
NOTE: You can also repeatedly
press the FUNCTION button on
the remote to select the tuner.
2
2
AUTOMATIC TUNING: Press
and hold the Tune/Skip/Search o
1
or n 2 button until the
frequency in the display starts to
scan, and then release the button;
the tuner will search and then
stop on the next strong station it
finds. Repeat this step until the
desired frequency appears in the
display.
2
1
5
Press the ST/MO button on the
remote while listening to an FM
station to cycle between the FM
stereo and mono modes.
NOTE: If FM STEREO is
selected and you have tuned to
an FM Stereo station, “ST” will
light in the display.
1
6
Adjust the EQ button ❶ and
VOLUME buttons ❷ (and the X-
BASS button on the remote) as
desired.
1
2
2
7
Hints for Better Reception
AM–The AM ferrite bar antenna is located inside the unit. It may be
necessary to turn the unit slightly so that the internal antenna is
pointing in the direction of the AM transmitter. You may have to
experiment to find the position that provides the strongest reception
for each of your favorite AM stations.
FM–Extend the FM wire antenna for best FM reception.
LISTENING TO THE RADIO