1operating instructions (continued) – Memorex MX4137 User Manual

Page 10

DISPLAY BUTTON

WHILE IN THE RADIO OR CD STOP MODE:

Press the DISPLAY button on the remote once to show the clock on

the display. Press a second time to show the timer’s On Time. Press

again or wait five seconds and the display will show the radio

frequency or total tracks/time of the CD.

WHILE PLAYING A CD:

Press the DISPLAY button on the remote once to show the

remaining time of the CD on the display. Press a second time to

show the clock. Press a third time to show the timer’s On Time.

Press again to show the elapsed time of the CD.

NOTE: While the display is showing the clock or timer's on time, after

five seconds, it will return to display the elapsed time of the CD.

WHILE IN THE LINE IN MODE:

Press the DISPLAY button on the remote once to show the timer’s

On Time. Press again or wait five seconds and the display will show

the clock.

OPERATING INSTRUCTIONS (CONTINUED)

With the power on, press the EQ

button to cycle through the preset

EQ settings or to turn the EQ off.

Each press of the EQ button will

cycle as follows: CLASSIC,

ROCK, POP, JAZZ, Off.

NOTE: If the X-BASS is ON when

you press the EQ button, the X-

BASS function will be off. Press

the EQ button repeatedly to set

the desired EQ settings."

EQ (EQUALIZER)

To temporarily mute the sound,

press the MUTE button on the

remote control; “MUTE” will

appear in the display and the

sound will be muted. Press the

MUTE button again to restore the

sound and “MUTE” will disappear

from the display.

MUTE

To listen to the unit through

headphones, simply insert the

headphones (not included) into

the Headphones jack. The

speakers will be disconnected

when the Headphones are

plugged in.

HEADPHONE JACK