Meridian America D-ILA 1080MF1 - Manual (Page 15)

1
F MENU Button
Press this button to display the menu. Pressing
this button when the menu is displayed clears
the menu.
G EXIT Button (main label Bypass)
Press this button to return to the previous level
up in an hierarchical menu (for example, to
return from submenu to main menu). Pressing
this button when the main menu is displayed
clears the menu from the display.
H PRESET Button (main label Profile)
Use this button to reset a selected menu item
to its factory setting.
J Pattern Button (main label 1)
Pressing this button projects a green grid sig-
nal, useful for adjustment of projector focus.
• Press the EXIT button (G) to return to the origi-
nal image.
K TEST Button (main label 9)
Press this button to access test pattern images
for adjustment of the projector or video sys-
tem.
• Alter the test pattern with the TEST button.
• Press the EXIT button to return to the original
image.
L FOCUS +/- Buttons (main labels 2/5)
Use these buttons to adjust focus of the pro-
jected image.
M HIDE Button (main label 7)
Press this button to temporarily clear the video
image. Press again to resume.
N LIGHT Button
Illuminates the remote control backlight for
about 10 seconds. Pressing any remote button
in a low-light environment will also illuminate
the remote as well as carrying out its function.
P ZOOM Tele/Wide Buttons
(main labels 8 and 0)
Press these buttons to enlarge or reduce the
size of the projected image.
Before use, load 3 AAA size batteries into the
remote control. If the remote control starts to
function erratically, replace the batteries.
Press the circular depression in the back cover
slightly with your thumb and slide the cover
downwards towards the bottom of the remote
control unit.
Insert the 3 AAA batteries supplied in the
directions indicated by the markings in the bat-
tery compartment. We recommend that you
insert the ‘–’ (minus) end of the battery first.
Replace and slide the back cover up to close it.