beautypg.com

Owner’ s manual, Booth level, Booth stereo/mono – MACKIE d.4 Pro User Manual

Page 19: Zone level, Main level, Main level meters, Dj star, Take a break

background image

19

Owner’s Manual

Owner’

s Manual

52. BOOTH LEVEL

This knob adjusts the output level at the booth out-

puts [10].

53. BOOTH STEREO/MONO

With this switch up, the booth [10] outputs provide a

stereo left and right output of the main mix.

If you only have one booth monitor, push the switch in

to combine the left and right signals to mono.

54. ZONE LEVEL

This knob adjusts the output level at the zone [11]

outputs.

55. MAIN LEVEL

This knob adjusts the main mix output level at the

main out XLRs [12].

It also adjusts the RCA main outs [14] but only when

the live/record [15] switch is out.

This control does not affect the main meters [57], or

the phones [51], booth [10], or zone [11] outputs, or
the FireWire outputs.

56. PAN

This knob adjusts the stereo balance of the main mix

at the main out XLRs [12].

It also adjusts the RCA main outs [14] but only when

the live/record [15] switch is out.

This control does not affect the main meters [57], or

the phones [51], booth [10], or zone [11] outputs, or
FireWire outputs.

57. MAIN LEVEL METERS

These meters indicate the signal strength of the main

mix outputs before the main level or pan controls.

You want to see the signals bouncing between the “0”

and the “+6” LEDs. It is okay if the OL LEDs at the top
light occasionally, but if they light frequently or continu-
ously, turn down the program faders [38] until they
blink occasionally, or not at all.

DJ STAR

Press this imaginary button to link up directly to tech

support telepathically through your headphones.

TAKE A BREAK

It’s time for a nice cup of tea and a cheese sandwich.

You deserve it, as not many people read owner’s manuals
past page 3.

The next few pages contain the following Appendices:

Appendix A shows service and repair information.
Appendix B is a section on audio connectors.
Appendix C shows the specs and a block diagram.
Appendix D shows how to replace the crossfader.
Appendix E shows FireWire details.