beautypg.com

Multi-Tech Systems ISI551PC User Manual

Page 12

background image

2-3

2.3 Hardware Installation Procedure

Perform the procedures in Table 2-1 to configure

and install the ISI551PC card into your ISA or EISA

bus host computer.

1

Make sure your computer and

any peripheral equipment

connected to it, are turned off.

Failure to do so may damage

both your ISI card and your PC.

The card may be installed in any

286-, 386- or 486-based

computer with an ISA or EISA

bus architecture.

2

Remove the cover of your

Table 2-1

Step Procedure

ISI Configuration and Installation Procedure

Figure 2-1. I/O Address Switch/IRQ Jumpers

See also other documents in the category Multi-Tech Systems Hardware: