Motorola WORDline FLX - Manual (Page 4)

11
Note: If the audio alert mode is selected, your pager automatically displays the
audio alert options screen.
Choosing an Audio Alert
If you select the audio alert mode, you can set your pager to alert with one of the audio
alerts.
➊ From the ALERTS menu, press and release ∞
until AUDIO? is displayed.
➋ Press ¡ to enter the AUDIO menu.
➌ Press ∞ until your choice of audio alert is
displayed. The pager emits a sample of each
alert.
➍ Press ¡ to select your choice of audio
alert.The standby screen is displayed with the
audio alert icon
- .
s 00:00cfwi - qyto
AUDIO?
s 00:00cfwi - qyto
ALERT 1
s 00:00cfwi - qyto
12:35P 4/23
ALERTS
12
Setting the Alarm
Your pager has three alarms. Each alarm can be set for either a specific time and
date, or for a specific time on a daily basis. If your pager is off when an alarm sounds,
it remains off.
➊ From the standby screen, press and release ∞
until ALARMS? is displayed. The alarm icon =
flashes.
➋ Press ¡ to enter the ALARMS menu. The alarm
number 01 flashes.
➌ Press ∞ to choose alarm 01 , 02 , or 03 .
➍ Press ¡ to move to the next field. The enable
= or disable q icon flashes.
➎ Press ∞ to enable = or disable q the alarm.
➏ Press ¡ to move to the hour field. The hour
flashes.
s 00:00cf wiu= yto
ALARMS?
s01 :00cfwiu q yto
12:35P 4/23
s01 :00cfwiu = yto
12:35P 4/23
ALARMS
13
➐ Press and release ∞ to adjust the hour.
Hint: Press and hold ∞ to adjust the setting
quickly.
➑ Press ¡ to move to the next field.
➒ Repeat steps 7 and 8 to set the minutes,
AM/PM, month, and day fields.
➓ Press º in any field to save and exit.
When an alarm is enabled, the alarm icon = is
displayed on the standby screen.
To alert on a daily basis, set the month and day
to --/--.
When an alarm expires, the alarm icon =
flashes, ALARM is displayed with the alarm
number, and your pager alerts.
Press any button once to stop the alarm, and
again to clear the message.
s 01:00cfwiu = yto
1 2:00P 4/23
s01 :00cfwiu = yto
1 4:30P --/--
s 01:00cfwi u= yto
ALARM 1
ALAR
MS
14
Locking Personal Messages
By locking messages, you can save personal messages to prevent them from being
replaced when the memory is full. Messages can be locked only while reading them.
Note: Up to eight personal messages may be locked. To lock another message
once this limit is reached, you must first unlock at least one message.
Unlocking Personal Messages
➊ Press ∞ while reading a personal message to
display LOCK?.
➋ Press ¡ to lock the message. The message
indicator ∫ is displayed.
When a locked message is selected or read, the
lock icon
y is displayed.
➊ Press ∞ while reading a locked personal
message to display UNLOCK?.
s 10:35afwiuqyto
LOCK?
s 10:3 4 afwiuq y to
¥¥¥∫
s 10:35afwiuqyto
UNLOCK?
MESSAGE FEA
TURES