beautypg.com

Operating tips, Clean the lint filter, Load the dryer properly – Maytag MD9206 User Manual

Page 5: Add a fabric softener sheet, Use a drying rack

background image

4

Operating Tips

Clean the Lint Filter...

• after each load.

• to shorten drying time.

• to operate more energy efficiently.

Load the Dryer Properly...

• by placing only one wash load in the dryer at

a time.

• avoid very small loads or mixing heavyweight and

lightweight clothes.

• when only one or two articles need drying, add a

few similar items to improve tumbling and drying
efficiency.

Add A Fabric Softener Sheet...

(If So Desired)

• after loading the dryer.

• to control static cling.

• before the load becomes warm. This helps prevent greasy–looking softener stains.

• and remove any used softener sheets from the dryer to prevent greasy–looking softener stains.

NOTE: Do not operate the dryer without the lint filter in place.

Use A Drying Rack...

(Found in select models or purchased
separately from your dealer using
part # MAL1000AXX.)

• to dry items, such as sneakers, pillows, caps,

stuffed toys, washable sweaters, etc. inside the
dryer without tumbling. (Make sure nothing hangs
over the edge of the rack.)

• with a Time Dry heat cycle or an Air Fluff cycle

according to care label recommendations.

• by positioning the rack in the tumbler with the two

extension wires towards you. The legs should rest
firmly on the front and back of the drum.