Charge – Marantz PMD671 User Manual
Page 49
- 49 -
REC PAUSE
DISPLAY
LIGHT
REC
LEVEL
L
R
REC
HP/SPK VOLUME
PHONES
KEY LOCK
10
Front continued
10. KEY LOCK switch
The KEY LOCK switch
secures the PMD671 in its
present state during
Record, Playback or Stop.
KEY LOCK
Slide the switch to the right to turn KEY LOCK on.
"Locked" is displayed for three seconds.
Only these controls will work:
Display LIGHT button.
POWER switch - Works during Playback or Stop.
PRE REC switch.
If you try to operate a button or switch that is
locked, "Locked" appears briefly in the display.
TRACK
TIME
TRACK
MIC
INT
-dB
00
40
20
12
6
2
0
over
-dB
R
L
DIGITAL
IN
OUT
CHARGE
DC IN 15V
USB
11 12
CHARGE
a
b
11. CHARGE indicator
The CHARGE indicator is
lit when an optional Ni-Cd
or
Ni-MH battery is charging.
12. CF card compartment
Pull the compartment door open to access the
CF card.
Door Open is
displayed.
Card eject
button
CF card slot
CF card door
Card eject button
The Card eject button has two positions: click
out (a) and click in (b).
To eject a CF card:
1. If recording or in playback, push STOP
.
If other operations are in progress, cancel
them by pushing STOP
or wait for them to
complete.
2. Open the CF card door*.
3. Push and release the Card eject button so it is
in the click out position (a).
4. Push the Card eject button from the click out
position to the click in position (b).
*Opening the CF card door turns the PMD671 off. If recording
is in progress, opening the CF card door automatically stops
recording and writes critical track information to properly
close the file before turning off. Close the CF card door to re-
start the PMD671.
To insert a CF card:
1. Push and release the Card eject button so it is
Slide the switch to the right to turn KEY LOCK
off. "Unlocked" is displayed for three seconds.
Example display:
Left side
The PMD671 automatically turns off.
in the click in posi-
tion (b above).
2. Fully insert the CF
card.
3. Close the CF card
door.
Note: If the CF card door won't latch, check that the Card
eject button is in the click in position (b above).