Motorola L404 - Manual (Page 13)

Getting to know your phone 13
10 PLAY/ STOP
In message playback mode: Press to playback or stop
playing messages.
11 SKIP FORWARD
Skip to play the next message.
12 MEMO
In Idle: Press and hold to hear a voice prompt recording a
memo and then start to record a memo. Release key to stop
recording memo.
2-digit 7-seg
base display
Behavior
-- Answering machine is OFF.
00 Steadily ON: No voice messages in answering
machine.
09 Flash in idle: Indicates the number of answering
machine messages and that there is an unread
message. (e.g. there are 9 answering machine
messages in total. Total number of messages is
from 1 to 59.)
Flash during message playing: The selected
answering machine message is being played.
Steadily ON: All the new messages have been
read and there are 9 answering machine
messages in total.
F Flashing: Answering machine memory is full .
CL Flashing - -: Time is not set and there are old
voice messages kept in the answering machine
memory only (no new voice messages).
0
9
9 / Blinking between 09 / : Personalized
announcement or memo is being recorded. The
numbers (e.g.09) indicate the total number of
messages in answering machine when playing
announcement.
In Flashing: Indicates an incoming call / recording
of an incoming call.
An Steadily ON: Represents Announce Only mode.
LA Flashing: Line Remote access is in progress.
L
A
A 09 / Blinking between L
0
9
A
0
9
0
9
9 / : Remote access is in
progress and the numbers (e.g.09) indicate the
total number of messages.
L3 Steadily ON: Indicates the base speaker volume
level is 3. Nine volume levels from L0 to L8 are
provided (L0 means ringer off).
L3 disappears after 3 seconds.
-- -- --
-- -- --