Motorola ME4251 User Manual

Page 18

Direct dialling
1. Press the

key and wait for the dialling tone.

2. Dial the telephone number and complete the call.
When the call is connected, the call duration will be displayed and will remain in the

display until 3 seconds after the call is ended.

The call timer format is HH:MM:SS.
3. Press the

key to end the call.

On-hook dialling (pre-dialling)
1. Dial the telephone number.
2. Delete any incorrect digits by pressing the SKR key.
3. Press the

key. The displayed number is dialled.

4. To end the call, press the

key.

Using the Handsfree Speakerphone

In handsfree mode, all communication is via the handset speakerphone and

microphone, leaving your 'hands free'.
You can make a call handsfree or switch to handsfree during a call.
Make a handsfree call
In standby mode:
1. Dial the telephone number and press the

key. The handset speaker comes on.

2. Press the

key and wait until the handset speaker comes on, then dial the

telephone number as required.

3. Hold your conversation - speak to the caller through the microphone and listen

over the speaker.

4. Press the

key to end the call.

BD1217 ME4251 user guide [5] 18/7/05 1:20 pm Page 17