Connect to service, Uninstall procedure – Minuteman UPS SentryII UPS User Manual

Page 9

NOTE: To execute SentryII Server at system startup the support NLM files may be placed in the AUTOEXEC.NCF file.

Connect to Service

Step 1. SentryII must be configured from a Windows client computer. Before you begin, you will need the IP address of the Novell

Netware server.

NOTE: TCP/IP is a requirement for SentryII. The Windows client must be running TCP/IP.

Step 2. Start your favorite web browser. Type in the IP address of your server in the Address bar.

(Example: http://ServerIPaddress )

Step 3. The SentryII security web page will load. The default User Name and Password is admin.

NOTE: The administrator User Name and Password can be changed from within the Users section once SentryII is connected.

Uninstall Procedure

NOTE: SentryII uninstall must be executed from the same Windows client computer that performed the original installation.

Uninstall SentryII by performing the following steps:

Step 1. Open the Windows Control Panel and choose Add/Remove Programs.

Step 2. Choose SentryII and click Add/Remove. InstallShield will guide you through the uninstall process.

Step 3. InstallShield can Repair or Remove SentryII.