Minuteman UPS SentryII UPS User Manual

Page 34

Step 2. Insert the SentryII Installation CD and select Install Software from the menu. If the autorun feature does not work, run

setup.exe located in the {cdrom drive}:\\RemoteClient\Netware folder on the SentryII Installation CD.

Step 3. The InstallShield Wizard will guide you through the installation process.

Step 4. When prompted for the SentryII installation folder, select a drive letter mapped to the SYS volume of your Novell server and

enter a new folder name, a maximum of 8 characters may be used, where the software will be installed. (For example,
F:\SentryII.)

Step 5. Specify the desired setting for the SentryII Remote client.

NOTE: This splash screen is only available during the install process. To change these settings after installation, you may edit the
InstallFolder\SIIRemote\SIIRemote.ini file.

The following is a description of the fields contained on this page:

• Server Address

The SentryII Server’s IP address.

• Server Port

The API port number of the SentryII Server. (See Server Settings on page 13)

• Username

The default is admin. This setting must coincide with the defined SentryII users list. (See
User Management on page 13)

• Password

The default is admin. This setting must coincide with the defined SentryII passwords list.
(See User Management on page 13)