Miele CVA 2662 - Manual (Page 53)

Coffee results
The dispensed coffee has ground coffee in it.
Possible fault Solution
The capsule plate is soiled. Clean the capsule plate, see "Cleaning
and Care".
The water flow stopped while the quantity was being programmed.
Possible fault Solution
– If the maximum water amount is
reached, the water dispensing stops
automatically. The maximum water
amount is saved.
– There was not enough water in the
tank. The dispensed water amount
will not be saved.
– Refill the water tank and reset the
serving size.
The preparing time and amount of coffee is very different.
Depending on coffee type the grind level will differ between coarse and fine.
Preparing time and amount will vary.
The espresso / coffee is not hot enough.
Possible fault Solution
– Check if the capsule plate is
clogged.
– Clean the capsule plate.
– Pre-warm the cup.
The coffee is too weak.
Possible fault Solution
– Check the water amount saved in the
memory per coffee.
– After 15,000 cups of coffee the
perforator needs to be replaced.
– Adjust if necessary.
– See "Cleaning and care -
Maintenance".
Frequently asked questions
53