Miele CVA 2662 - Manual (Page 12)

Filling lines with water
The appliance is drained completely
before leaving the factory. Before the
first drink is prepared, you will need to
pump water into the lines.
^ Place a cup under the coffee
dispenser.
Hot water
K1 K2 K3 K4 K5 L
o n
G k C
^ Select Hot water o using < or >.
^ Confirm with OK.
^ Allow some hot water to run into a
cup.
^ Turn off the water by selecting OK
again.
The lines are now filled with water, and
the appliance is ready to use.
Switching off
^ Select On/Off s to turn the coffee
system off.
When a coffee beverage is
prepared, the unit rinses once
before it switches itself off.
First steps to use
12