Miele CVA 2662 - Manual (Page 21)

Frothing milk in the cappuccinatore
^ Pull the cappuccinatore spout into
the "out" position.
^ Turn the valve all the way to the right
for frothing.
^ Fill the cappuccinatore to the lower
marking a with cold milk and cover
with the lid.
^ Place the cappuccinatore in the inset
on the drip tray.
^ Slowly press the steam lever down.
The steam lever must click into the
down position - otherwise the valve is
not properly connected to the
cappuccinatore.
^ Push the steam lever up when
enough froth is prepared.
Heating milk
^ Fill the cappuccinatore to the upper
mark with cold milk and put the lid
on.
^ Turn the valve all the way to the left
for heating.
^ Push the milk spout all the way in (hot
milk in the cup) or pull the milk spout
out (hot milk in the cappuccinatore)
and place the cappuccinatore into
the recess in the drip tray.
^ Slowly press the steam lever down
and carefully "connect" the valve to
the cappuccinatore.
Making coffee / espresso
21