Setting up a usb driver in windows 2000, Setting up a usb driver in windows – Motorola SBV5120 User Manual

Page 21

Text mode
Original mode

SBV5120 VoIP Cable Modem User Guide

Setting Up a USB Driver in Windows 2000

Insert the SURFboard VoIP Cable Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers
and must be inserted and read by the PC before you connect the VoIP cable modem to the PC.

Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see

“Cabling and

Startup for a Single User”

on page 8. A few seconds after you complete the USB connection, the Found New

Hardware Wizard window is displayed:

Click Next. The following window is displayed:

Be sure “Search for a suitable driver for my device” is selected.

Although your VoIP cable modem model number may be different than in the images in this guide,
the procedure is the same.