beautypg.com

Maytag MDG30MNV User Manual

Page 31

background image

113307 - 7

Maytag Co.

27

SECTION VIII

PROCEDURE FOR FUNCTIONAL CHECK

OF REPLACEMENT COMPONENTS

1. Microprocessor Controller (Computer) Board

a. Upon completing installation of the replacement microprocessor controller (computer) board, reestablish

power to the dryer.

b. Start the drying cycle by pressing any of the preset cycles in letters A-F.

c. Verify that the applicable indicator lights on the back side of the microprocessor controller (computer)

board are lit. (Refer to the illustration below.)

This manual is related to the following products: