Multi-Tech Systems MTCBA-E-U - Manual (Page 17)

Chapter 2 - Activation and Installation
Multi-Tech Systems, Inc. MultiModem EDGE USB Wireless Modem User Guide 17
Installing the Modem Driver in Windows Server 2008, XP, 2003
This installation assumes a Windows Server 2008, XP or Windows 2003 operating system.
Part A for Windows XP/2003: Installing the Serial Port
1. Connect the USB cable between the MultiModem and the PC.
2. Insert the MultiModem CD into your CD-ROM drive. The CD uses the Autorun feature, and
after a brief delay, the MultiModem Setup – Welcome screen appears. Close the Welcome
screen.
In some situations the operating system will display a Found New Hardware Wizard screen and asks
you: Can Windows connect to Windows Update to search for software?
Select No, not this time. Then click Next.
3. The Found New Hardware Wizard screen now displays the EDGE device.
Click on Install from a list or specific location (Advanced), and then click Next..