Monitor Audio GS60 - Manual (Page 9)

Spiked Foot Fixing
(Gold GS20, GS60 only)
The composite Gold GS spiked foot incorporates a spike for use on carpeted floors and
also, a soft polymer pad for use on wooden or tiled floors. The foot assembly is found
in the packing end cap, and the spike in the Monitor Audio Tool Box. Fig. 1. For more
technical information regarding the acoustic benefits of the spikes please go to:
www.monitoraudio.co.uk/gettingthebestfromyourspeakers
Please ensure there are no hidden wires under the carpet that could be
damaged by the spikes.
The foot assemblies come ready for use on solid floors or where spikes are
inappropriate. With the cabinet upside-down, rotate the spikes clockwise into the
outer most holes until they reach a stop. Fig. 2.
If you are using your loudspeakers where you can use spikes, follow the instructions
above and then take the spikes out of you Monitor Audio Tool Box, and screw them into
the threaded hole in the centre of the foot assembly. Fig. 3.
Fig. 1. Fig. 2. Fig. 3.
7.
© Monitor Audio Ltd 2005
V1