Monitor Audio GS60 - Manual (Page 5)

Your Gold GS10
With its advanced, low-resonance drivers, rigid build and contoured cabinet
edges, GS10 redefines accurate, low-colouration sound in a compact, stylish
stand-mount speaker. Using the new, low distortion 6-inch RST
® 2 bass-mid driver
and gold C-CAM ® tweeter developed specially for the GS series, the GS10 is capable
of true 3-D imaging and tonal accuracy to rival the best reference studio monitors.
Frequency
Response
Sensitivity
(1W@1m)
Nominal
Impedance
(ohms)
Power
Handling
(W) RMS
Recommended
Amplifier
power output.
(W) RMS
40Hz –
43kHz
88dB 100 40 – 100
Drive Unit
Complement
External
Dimensions -
Excluding plinth
H x W x D
mm (inch)
Weight Kg (lb)
1 x 6” RST ® 2
Bass/
mid-range.
1 x 25mm Gold
Dome
C-CAM ®
tweeter.
360 x 206
x 270
(14
3/16
x
8
1/8
x 11)
8.5 / (18.7)
8
Maximum
SPL (Per pair in
room). dBA
108
External
Dimensions -
Including plinth
mm (inch)
N/A
Bass
Crossover
Frequency
Hz
N/A
Bass
Alignment
Rear ported,
bass reflex
Tweeter
crossover
frequency
KHz
2.7
Tweeter
crossover
frequency
KHz
To remove the grilles, carefully prize it away from the cabinet using your fingers. The grille
locates in the elongated holes around the outside of the driver chassis clamp plate.
To replace it, line the peg fixings (in the grille) up with the elongated holes and gently
press into place.
3.
© Monitor Audio Ltd 2005
V1