Monitor Audio GS60 User Manual

Page 11

Connecting Your Gold GS Loudspeakers

You will notice that when you unpack your loudspeakers, there are plastic terminal caps
in the terminals where the speaker cable connectors should go. These can be simply
removed by placing a thin, ﬂat object underneath them and carefully levering them
free.

All of the Gold GS Series loudspeakers (except the GS FX) can be either single or
bi-wired/bi-amped. Monitor Audio always recommends bi-wiring your loudspeakers
for improved sound quality. (see page 10 for further information)

Please see for further information:
www.monitoraudio.co.uk/gettingthebestfromyourspeakers

If you are connecting your speakers in a bi-wire, or bi amp format, please

remove the terminal links. Do this by unscrewing the red and black

terminals slightly and removing the link. Connect the speaker as illustrated

on the opposite page.

You can also bi-amp your loudspeakers. This is carried out in the same way as
bi-wiring except instead of using one ampliﬁer to power all of the drive units/tweeter
in the speaker; you are using one ampliﬁer to drive the treble (tweeter) and the other
ampliﬁer to drive the mid/bass sections. If you are intending to do this, please consult
your local hi-ﬁ dealer for their recommendations for ampliﬁer rating.

This manual is related to the following products:

GS20 GS10