Tube standby, Cable rewind, Storage tube park – Morphy Richards VC70069 MUK User Manual
Page 6: Dustbag changing the dustbag
![background image](/manuals/114607/6/background.png)
6
Tube standby
G
During short breaks in cleaning,
the tubes can be held in an
upright ‘standby’ position, whilst
you move furniture for instance.
IMPORTANT: Ensure that the
appliance is never left
unattended whilst it is switched
on.
Cable rewind
H
Switch off the appliance.
Remove the plug from the
mains supply and rewind the
power cable using the cable
rewind switch Â.
WARNING: When using the
cable rewind, always hold the
plug as the cable will rewind
quickly.
STORAGE
Tube park
I
The vacuum cleaner can be
stored in an upright position.
Rotate the floor nozzle until the
lug on the back of it can be
fitted into the tube park slot Ï
on the base of the appliance.
DUSTBAG
Changing the
dustbag
J, K & L
If suction power is reduced or if
the ‘dustbag full’ indicator Á is
permanently fully red, the
dustbag needs changing. Also,
check whether the suction hose,
tube or nozzle are blocked.
To access the dustbag, press
the dust compartment release
lever ‹ to open the cover J.
1
Pull the tab on the dustbag to
one side so that the opening is
hygienically sealed K.
2
Pull out the dustbag holder fl
and dustbag in an upward
direction L.
3
Pull the bag fi sideways out of
the holder fl M.
4
Dispose of the bag with your
household waste.
5
Insert a new dustbag in the
holder.
6
Replace the dustbag holder and
close the cover.
IMPORTANT: If a dustbag is not
fitted, the cover will not close.
This is a safety feature.
I
L
И
И
UK Helpline 0844 871 0949
Replacement Parts 0844 873 0715
Ireland Helpline 1800 409 119
Ï
M
K
J
H
G
70069 rev1:VC70069 MUK Rev1 05/10/2009 09:55 Page 6