Marathon RJ-100SC - Manual (Page 38)

4 HAULER INFORMATION
LOCKING PIN
RETRACTED
MAINTENANCE BAR
POSITION
COLLAR
POSITION
COLLAR
EXTENDED
MAINTENANCE BAR
DRAWING B
DRAWING A
LOCKING PIN
EXPLODED VIEW
DRAWING A
INSTRUCTIONS FOR USING MAINTENANCE BAR.
1. Lower tailgate approximately 24” between container bottom and compactor
tailgate.
2 Remove locking pin from maintenance bar and slide bar toward compactor.
3. Align holes in the position collar and bar and insert pin.
4. Use a mop or similar cleaning device with a long handle to clean the seal.
5. Raise tailgate to relieve pressure on maintenance bar, remove pin, return bar to
retracted position and insert pin through collar and bar.
WARNING :
NEVER PLACE ANY PART OF YOUR
BODY BETWEEN THE TAILGATE AND THE CONTAINER.
HAULER INSTRUCTIONS - HYDRAULIC TAILGATE OPERATION
(FOR OPTIONAL HT UNITS) 4-4
EXPLODED VIEW
DRAWING B