Philips Magnavox 423 - Manual (Page 21)

21
Setup Menu
Digital Output
1 Press the
34 keys to highlight DIGITAL
OUTPUT.
2 Enter its submenu by pressing the
2 key.
3 Press the
34 keys to highlight the selected item.
➜ ALL: Original digital signal is output.
➜ PCM ONLY: If your receiver is PCM-
compatible, or your receiver can not decode
MPEG-2, Dolby Digital, or DTS audio, choose this
option.
4 Press OK.
5 Press the
1 key and return to the DIGITAL
OUTPUT SETUP menu.
Note: If DIGITAL OUTPUT is set to ALL, all audio
settings except MUTE are invalid.
LPCM Output
If you connect the DVD player to a PCM
compatible receiver via the digital terminals, such
as coaxial etc, you may need to select LPCM
OUTPUT.
Discs are recorded at a certain sampling rate. The
higher the sampling rate, the better the sound
quality.
1 Press the
34 keys to highlight the LPCM
OUTPUT.
2 Enter its submenu by pressing the
2 key.
3 Move the cursor by pressing the
34 keys to
highlight the selected item.
➜ 48K: Playback a disc recorded at the sampling
rate of 48kHz.
➜ 96K: Playback a disc recorded at the sampling
rate of 96kHz.
4 Press OK.
5 Press the
1 key to return to the DIGITAL
OUTPUT SETUP menu.
MDV423_02_Eng 2004.4.6, 1:48 PM 21