Philips Magnavox CT270MW8 A - Manual (Page 36)

36
EN
O
PERATING DVD
Note:
• Repeat setting (except “ALL“) will be cleared when moving to
another title, chapter or track.
• During programmed playback for audio CD, repeat setting
will be effective for the tracks in the program.
• Repeat playback or repeat A-B playback may not available
with some discs.
• Repeat A-B playback does not function during other repeat
mode.
• To cancel point A, press [CLEAR] at step 2 in “Repeat A-B
Playback“.
• Stopping playback will cancel repeat A-B playback.
Random Playback
CD
This function shuffl es the playing order of tracks instead of playback in the
sequence.
1
In stop mode, press [MODE] repeatedly until
“RANDOM” menu appears.
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
2
Press [PLAY B] to start random playback.
Note:
• To repeat the current track in the random mode, follow the
steps 1 and 2 in “Repeat Playback“ on page 35 and select
“
TRACK“.
• To repeat the entire random selections, follow the steps 1 and
2 in “Repeat Playback“ on page 35 and select “ ALL“.
• Random playback will be kept until you press [STOP C].
Programmed Playback
CD
You may determine the order in which tracks will be play back.
1
In stop mode, press [MODE] repeatedly until the
“PROGRAM” menu appears.
PROGRAM
ENTER
PLAY
CLEAR
CD-DA TOTAL 0:00:00
1/ 1 1/ 3
T 1 3:31
T 2 4:28
T 3 4:19
T 4 3:58
T 5 4:12
T 6 4:02
T 7 3:55
T 1 3:31
5
5
2
Use [Cursor K / L] to select a desired track, then press
[ENTER] to store.
• Additional tracks may be on other screens. Use
[Cursor K/ L] to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks
you wish to play back in the program.
or
PROGRAM
ENTER
PLAY
CLEAR
CD-DA TOTAL 0:08:22
1/ 1 3/ 3
T 15 3:18
T 16 4:24
ALL CLEAR
T 4 3:58
T 16 4:24
T 16 4:24
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a program,
use [SKIP H / G] to see all the tracks.
3
Press [PLAY B] to start programmed playback.
Note:
• Press [CLEAR] to erase the last track in the program if you
make an error.
• To erase all programmed tracks at once, select “ALL CLEAR’’
and press [ENTER] at step 2.
• While a program is being played back, [STOP C] works as
follows:
- Pressing [STOP C] once: The track will be in the resume
standby mode. Next time you press [PLAY B], the playback
will resume from the point where it is stopped in the
programmed playback.
- Pressing [STOP C] twice: Resume mode will be canceled.
Next time you press [PLAY B], playback will restart from the
first track in the original order. However, your programmed
playback can be restarted when you follow the above steps.
(Your programs are still stored until either the disc is ejected
or the unit is turned off.)
On some discs, [STOP C] will not work while the resume
message appears. Please wait until the message disappears.
• To repeat the current track in the program, follow the steps 1
and 2 in “Repeat Playback“ on page 35 and select
“
TRACK“.
• To repeat the entire program, follow the steps 1 and 2 in
“Repeat Playback“ on page 35 and select “ ALL“.
• Turning off the unit or opening the disc tray will erase the
program.
• You cannot use [the Number buttons] to select another
track during programmed playback. Use [REV h] or
[FWD g] to select other tracks in the program.
• You cannot combine random playback with programmed
playback.
• You cannot alter a programmed order during playback.
• You can start programmed playback only while in
“PROGRAM“ menu.
P77B1UT.indd 36 2007/09/21 13:22:15