Philips Magnavox CT270MW8 A - Manual (Page 18)

18
EN
W
ATCHING TV
Sleep Timer
The sleep timer can be set to automatically turn off the unit after an
incremental period of time.
1
Press [PICTURE/SLEEP] repeatedly until the sleep
timer menu appears.
[SLEEP]
[BRIGHT]
[CONTRAST]
[COLOR]
[TINT]
[SHARPNESS]
SLEEP OFF
• Sleep timer menu appears on the TV screen.
2
Use [Cursor { / B] to change the amount of time until
turn off the unit.
or
SLEEP 90MIN.
• You can set the unit to turn off after a set period of
time (from 30 to 120 minutes).
• Each time you press [Cursor { / B], the amount of
time will increase or decrease by 30 minutes.
• After set up, the sleep timer menu can be called up
for checking by pressing [PICTURE/SLEEP].
To Cancel the sleep timer
Use [Cursor { / B] at step 2 until “OFF“ is displayed on
the TV screen.
Note:
• The sleep timer setting display will automatically disappear
in 5 seconds.
• When you turn off the unit or when a power failure occurs,
the sleep timer setting will be canceled.
5 Picture Adjustment
You can adjust brightness, contrast, color, tint and sharpness.
1
Press [PICTURE/SLEEP] repeatedly until the desired
picture menu appears.
[SLEEP]
[BRIGHT]
[CONTRAST]
[COLOR]
[TINT]
[SHARPNESS]
2
Within 5 seconds, use [Cursor { / B] to adjust the
quality.
or
[Cursor {] [Cursor B]
BRIGHT to decrease brightness to increase brightness
CONTRAST to decrease contrast to increase contrast
COLOR to decrease color to brighten color
TINT to add purple to add green
SHARPNESS to make soft to make clear
5
P77B1UT.indd 18 2007/09/21 13:21:42