MITSUBISHI ELECTRIC XD70U - Manual (Page 26)

E-25
XD70
Adjustment of the Projection Screen
(1)
ST ANDBY
STATUS
ST ANDBY
AUTO
SOURCE
(1)
(2)
3
Turn the focus ring and adjust the focus of the screen
Making Adjustments with the Adjusters
While viewing the projection image, (1) press and hold
the adjuster buttons located at the left and right and, (2)
raise the projector to align the image with the screen, then
release your fingers.
Turn the left and right adjusters for fine adjustment.
Adjust so that there is no shaking of the projector.
Note:
When the projector has a suspended or rear installation is used, the orientation of the projection will need to be changed.
Please see “Vertical Flip” on Page E-50.
Adjuster button
Focus ring