Metrologic Instruments MS7620 - Manual (Page 8)

5
M OUNTING THE MS7600 S ERIES
There are three options for mounting your MS7600. Option “A” uses a shelf to
support the unit. Option B lets the unit hang free in the counter top. Option C
lets the unit hang free in the counter top with the use of a stainless steel trim ring
for support. The trim ring (
MLPN 46-46641) is an optional purchase. Contact a
Metrologic customer service representative for details at 1-800-ID-METRO.
Before starting to mount the MS7600, determine
the direction of package flow for your application.
The unit must be mounted in the countertop with
the small arrowhead on the top of the unit
pointing in same direction as the package flow.
Figure 5: Package Flow
O PTION A: Shelf Support
Figure 6: Specifications for shelf support.
Figure 7: Installation Tabs