Metrologic Instruments MS7620 - Manual (Page 38)

35
D ESIGN S PECIFICATIONS
MS7600 S ERIES D ESIGN S PECIFICATIONS
O PERATIONAL
Light Source: VLD 650 ± 10 nm
Laser Power: 1.1 mW maximum
Depth of Field:
0 mm to 203.2 mm (0”- 8.0”) for
0.33 mm (13 mil) bar code
Width of Scan Field:
85 mm (3.3”) @ 0 mm (0.0”);
142 mm (5.6”) @ 124 mm (4.9”)
Scan Speed: 2000 scans/second
Scan Pattern: 5 fields of 4 parallel lines (omnidirectional)
Scan Lines: 20
Min Bar Width: 0.127 mm (5.0 mil)
Decode Capability:
Autodiscriminates all standard bar codes; for other
symbologies call Metrologic
System Interfaces:
PC Keyboard Wedge, RS-232, OCIA, Light Pen,
Stand Alone PC Keyboard, USB, IBM 46xx
Print Contrast: 35% minimum reflectance difference
No. Characters Read:
up to 80 data characters(Maximum number will vary
based on symbology and density)
Roll, Pitch, Yaw: 360°, 60°, 60°
Beeper Operation: 7 tones or no beep
Indicators (LED):
amber = laser on, ready to scan
red = good read, decoding
M ECHANICAL
Dimensions:
193 mm (7.6") H, 88 mm (3.5") D,
229 mm (9.0") W
Weight: 2.88 Kg (6.35 lbs)
Termination: Three 10-pin modular RJ45 jacks
Cable:
Standard 2.1m (7’) straight; for other cables call
Metrologic
Specifications subject to change without notice.