Metrologic Instruments MS7620 - Manual (Page 7)

4
B EFORE I NSTALLING Y OUR MS7600
When mounting the MS7600 or replacing
the Top Plate:
D O N OT Press
on the window.
Figure 2
Lift the Top plate straight up to
remove.
There is no hardware required
to remove or replace the top
cover.
See caution on page 3.
There are two installation tabs
under the top cover that can
be used to place the unit into
the counter top mounting hole.
Figure 3
D O N OT P RESS
on the window in the
replacement Top plate.
Figure 4
D O N OT Turn
the unit upside down.
Figure 1