beautypg.com

MITSUBISHI ELECTRIC XD420U User Manual

Page 17

background image

EN-17

ENGLISH

3 FEATURE

MENU POSITION ...................................... Use to select the position of the menu on the screen, 1.

(upper left) or 2.

(lower right).

CINEMA MODE ......................................... When AUTO is selected, the film mode will be automati-

cally activated when a film source signal is inputted.
When OFF is selected, the film mode will not be acti-
vated.

VIDEO SIGNAL.......................................... When AUTO is selected, the appropriate video format is

automatically selected depending on the input signal. If
the image isn’t displayed correctly, select the desired
video format manually.

ANAMORPHIC........................................... Select ON when playing DVD discs containing data of

widescreen images.

PASSWORD FUNCTION ............................. Use to change the mode of the password lock or to enable or cancel the password lock. See page 21

for details.

LANGUAGE ............................................... Use to select the language used in the menu. (

/ English / Español / Deutsch / Français / Ital-

iano /

/

/

/ PORTUGUÊS).

RESET ALL................................................ Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).

CINEMA MODE can be adjusted only when a TV50, TV60, 480i, 576i signal is being displayed.

When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depend-
ing on the input signal in such cases.

4 SIGNAL

HORIZ. POSITION..................................... Use to adjust the horizontal position of the image.

VERT. POSITION ....................................... Use to adjust the vertical position of the image.

FINE SYNC. .............................................. Use to synchronize the projector with the PC input signal

so that the image is not blurred.

TRACKING................................................. Use to eliminate image noise such as wide stripes.

COMPUTER INPUT .................................. The projector adjusts its settings automatically when

connected to a DVD player equipped with a component
video output (Y, C

B

, C

R

). When the projector is connected

with a device having an RGB terminal, choose RGB
manually.

SET UP ...................................................... When OFF is selected, the black area becomes make

lighter. When 3.5% or 7.5% is selected, the black area
becomes thicker.

HOLD ........................................................ Use to adjust the image when flagging occurs near the top of the screen.

5 SIGNAL - USER (No need to adjust in normal use.)

CLAMP POSITION/

CLAMP WIDTH .......................................... Use to correct solid white or solid black in the projected

image.

Important:

You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.

FEATURE

XGA60

AUTO

opt.

MENU POSITION

VIDEO SIGNAL

?

RESET ALL

English

LANGUAGE

A

Ë

OK

MENU ACCESS

PASSWORD
FUNCTION

ANAMORPHIC

CINEMA MODE

AUTO

1.

ON

R G B

R G B

SIGNAL

HORIZ. POSITION

0

VERT. POSITION

0

TRACKING

0

COMPUTER
INPUT

RGB

FINE SYNC.

0

USER

XGA60

opt.

OK

ON

HOLD

7.5%

SET UP

CLAMP
POSITION

USER

0

CLAMP WIDTH

1

01_ENG.fm Page 17 Friday, May 26, 2006 4:19 PM

This manual is related to the following products: